You are here: Home  :  Door details & Pricing  :  Roller Doors  :  SWS Roller Doors  :  SWS Seceuroglide Excel
(Can't see menu? Allow ActiveX controls!)

SWS SeceuroGlide Excel

SWS are a large European manufacturer of roller doors and have an excellent reputation.  Refer to the SWS UK website for full product specifications - the important information (will it fit? how much is it?) is repeated on this page.

SeceuroGlide Excel in detail
LPCB approval info
Choosing the correct size
Brochure Download
Warranty Information
Delivery
Options/Choices
SeceuroGlide Excel Prices
How to Order

SeceuroGlide Excel in detail
The first (and only) LPCB level 1 approved garage door on sale in the UK market also with 'Secured be Design' approval; this door raises the benchmark for garage security. The thicker door slat (77mm high slat, 12mm thick) and excellent automatic locking mechanism and enhanced security features make this a very secure door indeed.  The 300mm roll diameter (square end plates) gives a drive-through height 350mm lower than the finished ceiling which enables the door to be fitted in many more garages than the typical steel roller doors.

Tough webbing

The SeceuroGlide Excel roller door offer increased security as the door is held in 90mm wide (all door sizes) Aluminium 'C'-shaped guides all the way down both sides of the door from floor to lintel and when the door is shut a very effective locking mechanism is automatically engaged at the top of the curtain.  In addition bottom slat anchors automatically engage once the door is closed.  SWS roller doors have excellent draft proofing as they have a weather seal across the base of the door and thick brush-strips in the guides. 

This door is only available with electric operation and as standard comes with two remote controls and 'safety edge system' for stopping the door if it touches an obstruction; a 'internal switch only' option is available saving 100 against the prices below.

To view videos of break-in attempts check SWS's detailed page on the Excel door... click the 'Testing' button, then the links to the videos - very interesting, particularly the end of the 'lift up attack' video where a non-SWS 'generic' door is breached all too quickly!

Locking Comb
Bottom Slat anchor

LPCB Approval info
 In order to achieve an LPCB approved installation the following criteria must be met:

1. The door must be fitted by an SWS approved fitter.
2. The top 300mm end plate must be above the lintel (i.e. Lintel to ceiling no less than 300mm)
3. If 'face fitting' the guides must not protrude into the opening
4. If 'reveal fitting' special steel reinforcement plates must be used as supplied by SWS AND the top 300mm end plate must still be above the lintel.
5. An external manual override, vision slat, external switch or keypad cannot used.
6. An approved number of fixings must be used and heads spoiled (as detailed in instructions)

Of course if you wish to DIY fit or if your installation will not meet the above criteria then you may still purchase the product and benefit from the higher level of security, however, you will not be able to affix the LPCB approved sticker to 'authorise' the installation.

See full manufacturers specification and product details on their website.

Also see pictures of an SWS Roller garage door being installed.

Choosing the correct size
The door normally mounts to the inside rear face of the garage door opening but can be surface mounted within the opening if desired within the security limitations mentioned above.  SeceuroGlide Excel doors are supplied to your exact size requirements without a cutting charge. 

Fitting to the rear face of the opening (Face fit): 
Measuring the width
Measure the brick to brick opening width, add the two guides
i.e. 2286 opening plus 2 x 90mm = 2466mm (Overguide width = 2466mm)

Measuring the height
a) Measure floor to lintel, i.e. 2200mm, ensure that you have the clearance to the ceiling of 300mm to accommodate the roll, if it is OK your guide height is 2200mm.  
b) If you do not have the clearance for the roll measure your floor to ceiling, i.e. 2450mm, take away the roll diameter, i.e.  2450mm - 300mm = a guide height of 2150mm.  See LPCB approval notes above
* Drive-through height is 50mm less than guide height.

Fitting inside the opening (Reveal Fit):
Measuring the width
Measure the brick to brick opening width and take away a tiny amount of clearance
i.e. 2286mm opening less 6mm = 2280mm (Overguide width = 2280mm)
Note: in order to maintain LPCB approval the top 300mm end plate must be behind the lintel - s
ee LPCB approval notes above.

Measuring the height

Measure floor to lintel, i.e. 2200mm, take away the roll diameter (300mm), 
i.e. 2200mm - 300mm = a guide height 1900mm  
Note in order to maintain LPCB approval the top 300mm end plate must be behind the lintel - see LPCB approval notes above.
* Drive-through height is 50mm less than guide height.

Brochure download
You can view SWS' own SeceuroGlide sales brochure in PDF format - 5MB.

Warranty information
See SWS Roller doors page

Delivery
Delivery time for an SWS door is approximately 2/3 weeks.  Delivery to UK mainland is included in the prices below. 

Options/Choices

Colours
Colours at standard charge: White, Brown, Light Beige, Burgundy Red, Fir Green, Navy Blue, Black, Anthracite, Graphite, Light Grey, Silver Metallic, Heritage Green, Ivory, Duck Egg Blue, Chartwell Green, English Oak, Walnut and Natural Oak.

Colours at higher charge: Textured Mahogany Woodgrain, Textured Golden Oak Woodgrain, Textured Rosewood Woodgrain, Textured Black/Brown Woodgrain and Textured White Woodgrain.

Bottom and vision slats, along with guides may be a slightly different shade to the curtain.

Medium Oak Woodgrain is supplied with Brown bottom.

Mahogany, Golden Oak and Rosewood are supplied with a matching bottom slat and Brown inner face and guides.

Emergency Access
If you have no other access into the garage other than through the garage door itself then you must fit an External Manual Overide; this will enable you to wind the door up in the event of a power cut - it is secured by a key/lock barrel to prevent unauthorised use.  Cost 165 inc VAT.  

Although fitting an External Manual Overide means that your installation will not meet the LPCB criteria you may still purchase the product and benefit from the higher level of security, however, you will not be able to affix the LPCB approved sticker to 'authorise' the installation.

Photocell safety beam 
SWS recommend the use of the photocell safety beam if you have a very short garage and the car will be parked close to the closing door.  100 inc VAT.

Additional remote controls
Additional remote controls are priced at 55 inc VAT.

No remote control

If you do not need to operate the door by remote control and instead prefer an internal wall switch then simply reduce the prices shown below by 100. 
 

Prices
The following prices for the SeceuroGlide Excel include:

Single channel remote control receiver, two remote controls, courtesy light, internal switch, touch sensitive safety system, internal manual override, additional security fixtures.

VAT and delivery to UK mainland is included.  Deliveries to Eire, Northern Ireland, IOM and channel islands 50 surcharge.

SeceuroGlide Excel
Basic colours, No box

"Overguide width" (Opening plus 180mm )

2000mm

2500mm

3000mm

3500mm

4000mm

4600mm

5200mm

Guide
Height
in mm

1900mm

1245

1350

1160

5305

1670

1820

2000

2150mm

1260

1360

1466

1550

1690

1840

2030

2300mm

1290

1375

1480

1560

1710

1860

2050

2500mm

1320

1410

1550

1590

1710

1940

2120

3000mm

1525

1650

1750

1780

1970

2170

2335

3500mm

1580

1710

1850

 

 

 

 

 
SeceuroGlide Excel
Woodgrain, No box

"Overguide width" (Opening plus 180mm )

2000mm

2500mm

3000mm

3500mm

4000mm

4600mm

5200mm

Guide
Height
in mm

1900mm

1330

1460

1590

1680

1850

2020

2230

2150mm

1360

1490

1620

1710

1880

2070

2280

2300mm

1390

1510

1640

1740

1920

2100

2320

2500mm

1430

1550

1720

1950

1960

2200

2410

3000mm

1660

1820

1950

2020

2240

2480

2690

3500mm

1740

1910

2080

 

 

 

 

Optional items:
Additional remote controls: 55
95db Alarm module: 75
Photocell safety beam: 100

How to order:
Please call 01342 301811 - A deposit of 20% is required upon placing your order, a credit/debit card must be used; this can be done by telephone. We do not accept cheques for the payment of a deposit.

Supply only: If you wish to settle the balance by cheque then we require cleared funds prior to delivery. Payments by credit/debit card are due immediately upon delivery (not installation).

Supply and installation by AHA: If you wish to settle the balance by cheque then a cheque must be given to the installation engineer once handover has been completed. If your wish to settle the balance by credit/debit card payment please telephone the office the day after installation.  

To order you'll need:

1. Payment for the deposit
2. Opening size width x height
3. Your choice of colour
4. The side that the motor is required (standing in side the garage looking out)... consider... best side for 3-pin socket and access to manual override if a car is in the garage.
5. Do you require any optional items? 

Please call or email us if you have any questions.

Sitemap